- Mineral Separator[3]
- Cement Making Machinery[2]
- Other Construction Material Making Machinery[6]
- Alkali[6]
- Lime[6]
- Oxide[6]
- Crusher[3]
- Dust Collector[6]
- Other Chemicals[6]
- Other Chemical Equipment[6]
- Building Material Making Machinery Parts[1]
- Other Police & Military Supplies[1]
- Energy Saving Equipment[2]
- Other Machinery[4]
- Other Mining Machinery[1]
- Power Distribution Equipment[1]
- Other Construction Machinery[1]
- Contact Person : Ms. zheng kery
- Company Name : Anhui Luxing Environmental Engineering Technology Co., Ltd.
- Tel : 86-0550-5961258
- Fax : 86-0550-5961257
- Address : Jiangsu,Nanjing,No.66 Yuanzhuang group Getang town Liuhe district Nanjing city China
- Country/Region : China
- Zip : 239236
Dust removal device apply in produce hydrated lime
Related Product Searches:Dust removal device apply in produce hydrated lime,High Quality,Dust removal of produce hydrated lime,hydrated lime dust
XCE dust removal device apply in process of producing hydrated lime.1. Relevant field of technologyDust removal device for producing hydrated lime is widely used to deal with the dust and harmful gases produced in the process of lime hydration in Iron and steel plants, power plants, chemical plants etc.
It can meet the needs of a variety of processes. This equipment adopt the atomization dust removal and the impact of water filtration technology, enable to deal with the dust and harmful gases produced in the process of lime hydration.
That means the abandoned dust of quicklime can be recycled and there is no dust pollution at the worksite. It will contribute to lime hydrated process reasonably allocating water needed during the lime hydration.
According to the quicklime feeding amount in different enterprise, different specification of lime hydrator will be choosed to hydrate quicklime adequately. After the dust removal device and the lime hydrator forming a complete set, the lime hydration ratio can exceed 90%, the dust extraction ratio can reach 99%.2. The mechanism of XCE Dust Removal DeviceThis device taken the techniques of dust labyrinth circulation and fluid dynamics. It's able to balanced allocate the effective wind produced by blower-fan into the internal dedusting pipes. So that all the steam and dust produced during the process of quicklime hydration could be balanced disposed and filtered by the high pressure spray and water in tank. And all the filtered water and dust flow back to hydrating cabin. Finally, it will achieve the aim of hydrating quicklime adequately. The dust extraction ratio can reach 99%.3. Installation1) XH series burnt lime hydrator installed in the upper of the bottom belt of screw feeder. The inlet connected with the outlet of the scress feeder, and the hydrated lime will fall on the collection belt or the feed tank. This dust removal device will be installed beside the distribuing cabin of the burnt lime hydrator, any posintion 1-10m away from the belt bracket. The inlet of the dust removal device and the outlet of the hydrator are connected together. Through the high pressure mud pump the hot slurry will be drained into burnt lime hrdrator to achieve secondary utilization.
2) Picture as below:
( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v1/545661579_1/Dust_removal_device_apply_in_produce_hydrated.jpg' , 'http://i01.i.aliimg.com/photo/v1/545661579_2/Dust_removal_device_apply_in_produce_hydrated.jpg' , 'http://i01.i.aliimg.com/photo/v1/545661579_3/Dust_removal_device_apply_in_produce_hydrated.jpg' , 'http://i01.i.aliimg.com/photo/v1/545661579_4/Dust_removal_device_apply_in_produce_hydrated.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); Dust removal device apply in produce hydrated lime